Equipment parameters and accessories:

1. The three coordinate motion systems of cutting head are composed of imported high precision gear rack, straight-line square guide rail, AC servo system, etc. The equipment has the advantages of reliable performance, small error and high efficiency.

2. CAD design graphics, machine automatic cutting, all cutting data are completely controlled by computer.

3. Straight line cutting accuracy ≤ ± 0.1mm/m, special cutting accuracy ≤ ± 0.1mm/m

The thickness of the glass can be cut: 0.3-2mm, the maximum cutting speed: 80m/min;

Cutting accuracy: parallelism ＜ 0.1mm/m, diagonal ＜ ± 0.1mm/m.

4. Table size: 650 * 550mm, original cutting glass sheet size: 600 * 500mm

5. Power / power:

★ installation power requirements: 380v/50hz (three-phase four wire), and can be adjusted according to customer requirements in special circumstances

★ actual power of equipment: 4kw

★ compressed air: 0.6MPa (provided by the user)

6. Equipment performance:

★ equipment frame: the equipment is milled and planed by large finishing equipment after aging treatment to ensure that the frame and table surface are not deformed

★ cutting tool holder: adopt Japanese SMC proportional solenoid valve, adjust the pressure automatically according to the thickness of glass, rotate the cutter head 360 degrees, and cut the upper and lower buffer and lower knife (can accurately cut any straight line and various kinds of special glass)

★ table top: natural marble table top, which ensures no deformation

★ positioning system; photoelectric positioning, automatic edge finding and positioning system, automatic trimming of the specific position of glass, cutting according to the actual size.

★ oil supply mode: pneumatic automatic oil filling, synchronized with cutting tool

7. Mechanical part:

★ gear rack: adopt Japan kkk

★ guide rail: Taiwan Shangyin

★ cutter wheel / clip: Boler, Germany

8. Electrical part:

★ PC computer access is used for control, and Microsoft window interface

★ voltage: 380v/50hz, equipment with voltage stabilizing device

★ motor: Huichuan servo motor

★ control system: Beijing Baolun CNC

★ pneumatic components: yadek, Taiwan